• Apple iPhone 6 - 511660 Passive Holder with Tilt Swivel

Apple iPhone 6 - 511660 Passive Holder with Tilt Swivel

  • Brodit
  • 511660
  • In Stock
  • £24.99

Brodit Passive holder with tilt swivel

Keep your iPhone 6 in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone 6 is held securely in place in an upright position for maximum cellular reception. You can connect e.g. a portable handsfree or a charging cable to the device when it is in place in the holder.

Check the compatibility section if supported with your mobile phone

The holder is made of ABS plastic and is padded. This means it has a plush coating which is extra protective for your device. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone 6 without skin.

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22° in each direction. Attach onto ProClip Mounting Platform.

*Requires a ProClip mounting bracket or similar product to secure the holder without damaging the dashboard. Visit the fitting accessories section and you will find different options to suit your requirements.

Whats Included?

  • Brodit Holder (mounting bracket sold seperately)*
  • Fitting Instructions
some Brodit accessories are dispatched direct from our suppliers as they are special order. If the item is not in-stock in the UK with our supplier it may have a lead time of 5-7 working days for delivery. Please check with us before ordering Brodit items.

 

The holder fits for iPhone 6 without skin and without Apple original Bumper

Installation is easy, with no special tools required. Detailed instructions with pictures are included. Please read all of the instructions and look at the pictures before attaching the holder. Full Instructions also come with your Brodit holder.

ProClip Dash Mounting Bracket
*Requires a ProClip mounting bracket or similar product to secure the holder without damaging the dashboard. Visit the fitting accessories section and you will find different options to suit your requirements.

1.
2.
3.
4.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.

3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the holder is firmly in place, but still can be adjusted.

4. The holder is in place.


Dash Holder Spec
Holder Features Passive Holder

Write a review

Note: HTML is not translated!
    Bad           Good